LARGE ENGINE CONTROL MODULE for Dual Fuel engines

System offering comprised of Gas admission valves (SOGAV), Diesel main and μPilot injectors (Woodward L’Orange Single needle DF injector support), electric Waste Gate and LECM advanced control.

LECM Large Engine Control Module - Diesel engine control
LECM Large Engine Control Module - E6

MAIN: ENGINE CONTROL UNIT

LECM Large Engine Control Module - Main Board

The LECM Main module offers an advanced hardware architecture with a powerful processor and extensive I/O and Ethernet to support the evolving needs of Large Engines. Ethernet can be used for a service interface, an HMI/PLC interface using Modbus TCP/IP, for remote diagnostic emails, and for an IIOT interface to a local gateway.

AUX: COMBUSTION CONTROL

LECM Large Engine Control Module - AUX Board

24-channel analog inputs can be configured as knock, pressure or thermocouple input. The Aux hardware supports FFT-based knock detection, advanced knock: pressure sensor assist for knock calibration, in-cylinder pressure-based, real-time combustion diagnostics & control (RT-CDC) and thermocouple monitoring.

EID (ELECTRONIC IGNITION/INJECTION DRIVER) MODULE

LECM Large Engine Control Module - EID Board

One 20-channel module to drive any combination of injector (main chamber, pre chamber, micropilot & common rail) and ignition. Programmable current profile offers the ability to meet any desired energy delivery.

  • Ignition: Spark plug wear estimation (plug life indicator)
  • SOGAV injection driver: Valve open time and valve close time detection
  • Common rail: Multi-shot injection offers static and dynamic fuel trimming